Queen-Ten suited is one of those strong and silent types of poker hands.
It’s not a premium Rolls Royce like Pocket Aces. Instead, it’s more of a Volvo: fast, reliable, and safe. Nothing wrong with that in my book!
In this article, you will learn the following:
Let’s get into it.
Let’s run through every common preflop spot with Queen-Ten suited.
Queen-Ten suited is strong enough to open-raise from any position. Limping with this hand would cause you to lose out on some expected value because you can’t doesn’t deny equity by limping, plus it will lead to you winning smaller pots on average.
Your play when facing a raise should depend on your position and the position of the raiser. Let’s split this section into three groups:
Here are the table positions for your reference:
There are two schools of thought for playing versus raises in cash games, both of which can be good:
Both strategies have extremely similar expected value (EV) as long as you apply the appropriate postflop strategy. So, you can choose whichever one you’re more comfortable with or the one that seems to make more sense in your games.
Related article: Should You Stop Cold-Calling in Cash Games?
If you want to use the 3-bet or fold strategy, you should sometimes 3-bet with Queen-Ten suited, but not always. To be more precise:
If you want to go with a mixed strategy, then you should usually just call with Queen-Ten suited. This hand is not strong enough to 3-bet for value, nor is it weak enough to 3-bet as a semi-bluff. It falls right in the middle, making it the perfect call in most situations. That said, if you are on the Button against a Cutoff raise, specifically, you can mix between 3-betting and calling.
You should 3-betwith this hand against almost all positions in a 6-max game. The one exception is when the Lojack is the player who raised, in which case you can fold. In a 9-handed game, get out of the way versus UTG, UTG+1, and UTG+2 as well.
When you’re in the Big Blind facing a raise, you should vary your play based on the position of the raiser.
If it was the Cutoff or Button who raised, you can either 3-bet or call (using a mixed frequency strategy is best according to preflop solver outputs). Against all other positions, just call and see a flop.
In high rake games, which is most poker games, preflop solvers show that Queen-Ten suited should sometimes be called and sometimes be folded when out of position against the 3-bettor.
There is essentially a huge penalty for calling a 3-bet and seeing a flop when most games have a “No flop, no drop” rule in place. This is why such a powerful hand should still hit the muck against a 3-bet some of the time.
When you’re facing a 3-bet and have the advantage of being in position, you should almost always call with Queen-Ten suited. The exception here is when you raised from Early Position or Middle Position and the player who 3-bet is a good player (with a well-built 3-betting range), in which case you should fold.
Not all 4-bet situations are the same, so let’s break this section down into two scenarios.
You should usually fold in this spot. The exception is if you are on the Button facing a 4-bet from the Cutoff, in which case you can call because ranges are so wide.
You should only call in this scenario when it is the player on the Button 4-betting. Otherwise, make the fold.
Keep in mind that it is important to consider your opponent’s 4-betting tendencies. Against a tight 4-bettor, for example, you can usually comfortably fold Queen-Ten suited to their 4-bet, regardless of your/their position.
Note: Learn step-by-step how to become the best player at the table when you join the Upswing Lab training course. Elite pros have been adding new content every week for the past four years, and you get all of it when you join. Learn more now!
The 3-betting range is so strong (see: range advantage) against the calling range of the opponent that you should always fire a small c-bet. The only times you should be careful and check (with the intention to check-fold) is when the board is low and connected — think 8-6-5. Those boards favor the caller. More info on this is in the following tip.
I’m talking about boards such as 8♥ 6♥ 5♣ or 7♠ 6♠ 5♣.
On boards like these, Queen-Ten may have a backdoor straight draw, but that’s not enough to justify putting any chips in the pot. The board is so connected and so much better for the caller’s range than yours. This is because they have a higher concentration of low-medium pocket pairs and suited connectors, so your overall strategy should be very passive in these situations.
When you have some type of backdoor equity like a backdoor straight or flush draw, then it’s best to bet. There are many turn cards that will enable you to continue semi-bluffing.
When you have a strong hand in poker, you should almost always lean towards building the pot ASAP. When you flop two pair, trips, a straight or a flush, you should basically always fast-play your hand.
That being said, when a whole new class of strong hands materializes on the turn, such as a straight or a flush, then checking at least sometimes with the lower classes of strong hands (like two pair) is part of a good strategy.
For example, suppose you c-bet in position on Q♠ T♦ 6♠ and the turn is the 9♠. You can consider checking back on this turn.
Your opponent is going to show his hand strength on the river with his bet size very often, and you will be able to raise for value efficiently (versus small bets) or simply call (against big bets). By playing it this way, you will end up losing less than you would have if you bet on the turn and called a raise. Plus, you’ll still have a chance to get some nice value versus worse hands.
On most boards, the top pair that you’ll hit with QTs will not be strong enough to value bet across three streets.
Queen-Ten’s top pairs are usually worth betting two streets for value because your kicker will only be good (not great). When this is the case, it’s usually better to extract value by betting flop, checking turn, and betting river (rather than bet-bet-checking).
This way you give your opponent the chance to bluff on the river. Otherwise, you will find yourself in a clear value-bet spot on the river should your opponent check again.
Second pairs are usually medium-strength hands that are best played passively, and they should still be played passively when you have a flush draw.
If you’ve been reading Upswing Poker articles for some time, you might remember that when you have a medium-strength top pair with a flush draw on the turn, you should bet with it, even if you’d check that same top pair if it didn’t have a flush draw.
But when you have a flush draw to go with your middle pair, it’s still not strong enough to go for value. Instead, you can view it as a middle pair with an insurance policy.
There you have it, the 5-minute crash course for playing Queen-Ten suited better than the next guy!
If you enjoyed this article or you’d like to know how to play some other hands, please let me know which hand you want to see covered in the comment section down below.
Want to keep learning about the best way to play certain starting hands in No Limit Hold’em? Check out How to Play Pocket Sevens in Cash Games.
Till’ next time, good luck, grinders!
Note: Ready to join 5,000+ players currently upgrading their No Limit Hold’em skills? Crush your competition with the expert strategies you will learn inside the Upswing Lab training course. Learn more now!
Leave a Comment